Also I need a dummy HMDI, IGPU graphics on, GPU main display on BIOS and boot with the HMDI connected to the monitor to the GPU. The verbose stacks at boot so I unplug the monitor from the GPU and then I do that:
Iāve just repeated the procedure to be sure as I found this yesterday testing BIOS settings.
what happens if you reduce memory a bit so it shows 8550-8575ā¦ and set
nvidia-smi -lgc 1450 ?
Up to MUlt 40 hit the limiter and halves
Maybe doing both of them from the terminal ?
Anyone knows the script?
You should change to LolMiner, you will get greater performance in combination with Drivers 460.39 and:
Lowest Fee than other miners only 1.5% vs 2.0% or 2.5%
You will have real hash, not like you have now. LolMiner is only of the two miners that report real hash in ERGO, because they count the no mining time of the Data Ergo Set. You are not seeing drops now and that is not true. During the Data Ergo Set you are not able to mineā¦ how can you still have Mhsā¦ so thatās not honest from that miners
Iāve been a few hours running it on lolminer for that exact reason and to see if I have different results on the pool.
ATM Iām not having rejects as I was getting with NBMiner.
Regarding the driver, 460.39 does not recognise the new 3060ās.
You are right, my fault. I thought you have a v1 and not a v2. If is v1 it can still work with 460.39
At the moment you are seeing reality the average including the no mining time of the Data Ergo Set is real hash. And you are in a lucky moment 2% over the average speed 
Have you tried on P0 state? I was able to squeeze a bit while watts didnāt go mad.
I donāt recommend youā¦ that only increase Mhz in memory of 400, you can do it manually that 400Mhz. That P0 state is a protection for the memory when using CUDA. For Ergo is not so important that extra like for ETHASH
Thatās a good call, Iāve been looking to find the top speed but I pretend to running it with less stress, 118 @ 98 its not that bad after all.
Hi, could you send your settings, please, and say what you have done? Thank you for help
Try those settings and see how it goes.
Sorry if I ask a stupid question. How did you lock core and set core offset on linux or youāre using windows? Thank you for your reply
Guys, need helpā¦
I have the rig with 5 pc of 3060 RTX (first rev)
It mined well ergo on the 460.39 driver, more that 120+ each
Last week I added 3070 ti to the rig, on this driver (460.39) 3070 ti does not work.
I started testing different drivers and tried it: 460.84 460.91.03 465 465.24.02 465.27 465.31 - everything starts, but 3060 on the ergo does not give more than 80.
At 460.73.01 - 3070 ti again stops being detected
How can I fix it? overclocking was the same on nbminer and t-rex.
How can i use 3060 rev1 + 3070 ti in one rig.
As of now, you canāt get 120 MH and use 3070ti and 3060 with the same motherboard. You will have to get a new motherboard OR have to sacrifice some MH. I have a 3080ti and have the same issue. I had to setup another rig just for the tiās.
But what the reason?
Yesterday I spend all night to check different settings.
I managed to achieve speed 104MH 3060 with nbminer 37.5
The reason is that nvidia patched new drivers to give old cards less hashing power. But the thing with Ti cards is that they were released later so you will have to run somewhat new drivers which means lower hashrate for old cards with these new drivers.
I hate windows mining, on Hive i have a 3060 dialed in to 118mh @115w windows couldnāt keep a stable OC if its damn life depended on it.
Ive been able to get 104-108 then dips to 77 - 89 back to 104 back downā¦
For me, its giving me 120-121 Mh/s constantlyā¦ You can use the OC settings below.
Nvidia Driver: 460.39
Hive OS version: 0.6-209@210819
This only works for v1 3060s with driver 460.39. And then it is not the best setting.
Try absolute core clock.
core 1550 memory 2550 power 120 fan 85%.
