I have the same problem here, did someone found a solution?
I started having the same issues with my AMD rig after installing 0.6-199@210216. I’m going to downgrade to the 0.6-199@210210 version now to see if that resolves the issue.
I’m a bit leery of using the hard reset method as this could cause damage to your mainboard. Given the current state of affairs with price gouging on everything mining. A new mainboard could cost upwards of $300 today.
I have exact same problem… some times it mine well for 12hours sometimes it drops evry hour. I never get more than 24hours mine continuously…
maybe Im wrong but I think it started after swaping from outdated claymore to phoenixminer the rig become unstable.
So far, so good with stability on running the 0.6-199@21021 version. I’ve ran for 24hrs and no random outages. I am running lolminer so the 0.6-199@210216 version would have an impact on my miner. I’ll give it another 24hrs and then attempt to upgrade again.
2 Likes
Updated to the latest version 0.6-199@210218 and have had two restarts. GPU temperature 511 is unreal, driver error, rebooting. Not sure of the next steps at this point.
I had the same issue on 0.6-199, freezing at the most inconvenient hours, and only a hard reset would get it going again.
I had to downgrade back to 0.6-195 to fix it for me. It’s running stable again all day and night.
1 Like
The issue with the GPU temperature was caused by a loose riser card. Reseating the card resolved that issue and running the latest version has been stable for me 24hrs in a row.
yes, gpu temp 511 is usually due to riser or cable issues, that’s a known issue
but the freezing didn’t even give any errors, the OS was just stuck, so those seem different problems
Can you share your programm? I have no idea how to do this. Best wishes
Did you solve this issue? I’m having same thing. Can’t seem to find the problem
Hello guys,
I finaly got thé solution.
I read it on a commantary on Facebook, the motherboard is to hot so hiveos freeze. I put two PWM on the motherboard for try because i not a pro. And it been 3 Day without freeze, before i have freeze every Day.
2 Likes
Hi. I have same issue, rig freezes in random times, only hard restart helps. Sometimes working 12h, sometimes 8h. My cpu is RYZEN 5 1600, and B450 MSI mobo. I have solved this by adding little cpu overclocking ( CPU loadline calibration control - mode 3 and underclocking my RAM from 2400 to 2133 (i have 2400 memory) ) Now works great. Maybe it will helps for you.
Same issue here. Sometimes it works 24 hours straight and other times 5-6 hours before it freezes. No error message, it just freezes. Maybe it will be interesting to post our rig builds in order to find a common issue:
- MSI X470 GAMING PLUS MAX
- Athlon 3000G
- Kingston HyperX Fury Black 8GB DDR4 3200Mhz PC-25600 CL16
- 2 x PSU Corsair RM750
- Risers: VER009
- SSD installation
- System version: 0.6-203@210424
- Miners: T-REX for the 3070 and Teamredminer for the amds.
- Cards and OCs:
Hey I have same issue, suddenly my system started freezing, 2h -4h -6h very random, and need to turn off the system and turn it on back again, how to do CPU loadline calibration? can you please guide?
My system config is:
Ryzen 5 1600X
MSI GA-AB350-Gaming 3
8 GB 2666 ( today I have set it to 1866 let see how it goes.)
128 SSD
Miner: GMiner 2.53
mix rig 5700XT + 580XT, 1060 x3
CPU Temp stays around: 60 degree.
In your bios should be CPU overclocking settings, it should be there in cpu power mode or something like that. Just go to bios and try to find it. That helps for me, but i don’t guarantee that will helps for you.
I’ve been having random crashes ever 2-4 days, I setup a telegraph bot, so I can reset the power remotely with a smart plug.
Every now an then it would turn off just as I went to bed. So a good 6-7 hours before I’ve notice that it’s not running anymore.
I ended up created a small javascript page, that pulls the rig data, and if the rig is offline for more than 3 minutes, commands the smart plug to reset via IFTTT
3 Likes
After the last update my rig has been mining non-stop for two days. That’s a record for me.
Maybe the problem has been solved??
Hello, before trying anything else, I would reinstall everything from scratch on a “known to work SSD/HDD” and use the cards with no flashed memory timings and with no overclock. I would maybe only do a slight undervolt so that they don’t heat too much during the testing. If the freeze keeps happening, THEN I would spend time investigating.
In my case, I think that diminishing the overlock and memory timings on 2 of the 6 cards helped with stability, as well as a fresh reinstall.
Hi! How can I check, which card freezed? My computer is freezed and after restarting I can’t see which card not worked.The miner restarting and it’s log file rewrited.
The miner never reported one card with errors or bad submitted blocks? If so, then you have to try one by one over a few days