Or it overheats after 8 hour of work
Really funny that you made such conclusion when most users including professional miners all use HiveOS without issues. How many hardware do you have? Maybe 1 board and 1 3060. So most likely is your hardware issue.
1 Like
In fact I have enaugh hardware considering I’m not a professional miner. (4 rigs with total of 20 GPU). Until now having tried all the combinations and I concluded that the only ok combination is with Lolminer and Hiveon pool. With 4 pcs of RTX 3060 I get 150 MH/s and this is only combination which is stabile for a days. All other combinations (other miners) fall within a few minutes or one hour especially the T-rex miner when I tried fan glitch from NBMiner and Nanopool . I got 0% fan and when I changed Flightsheet to T- Tex it becomes unstable after a minute or two or does not connect at all .
So that’s my conclusion whether someone liked it or not
Hmm, seems like you are trying to get stable with a couple of 3060s with the glitch method. I do not think HiveOS was designed specifically to glitch LHR cards, therefore I think the assessment was unfair. Try to run 3060s without glitch, if they are still not stable then perhaps the community here could help.
First of all the cards are not LHR 
Why are you trying to glitch them if not LHR?
you are just doing it wrong. hiveos works great.
show us your settings.
stop bashing hiveos for your incompetence. unbelievable what you write.
as a start for example with ergo:
nvidia driver 460.39 (THIS IS THE ONLY ONE FOR 3060s V1 working correctly, blame nvidia not hive.)
nbminer 37.3
core 1550 mem 2500 power 130
124.x mh/s
1 Like
all 3060s are LHR. v2 a bit more locked than v1.
First of all the termin LHR existed a month or two ago. Prior to that, no GPU was an LHR. The term was introduced by Nvidia along with a restriction on the GPU for mining.
The question is how the Glitch works on a real LHR GPU. Whether it works or not
and those from a year ago when this term doesnt exist ?
Brasko to je problem s tvojej strany, na hive os sa najlepsie tazi
All 3060s (non ti) are nerfed. GA106-300 (pci id 2503) main chip is the first released. nerfed for eth, only possible full unlock is with windows and accidently released 470.05 dev driver, x16 pcie slot (min x8), hdmi dummy. does not work on risers without “fan glitch”.
Newer 3060s have a new pci id 2504 and have GA106-302 main chip. so dev driver does not work anymore. the only chance to unlock is with “fan glitch”.
Hive can not do anything without a propper nvidia driver for linux.
tom-i, stop wasting your time. I think his intent is to bash HiveOS no matter what others reply. He’s got a “bad” experience so be it. Let him go to windows or whatever and leave this community. Having said that I would bet he would be still using HiveOS… xD
Let’s see how long he hangs out in this forum… xD
2 Likes
First of all, I did not come to argue but I expressed my opinion based on the actual situation and conclusions. Not everyone has to like it but it’s an existing situation. And let’s face it I don’t intend to compare Hiveos and Windows
There does seem to be some issues with HiveOS 0.6-206@210721+, my rig becomes very unstable with it, but HiveOS 0.6-206@210715 is very stable for me. It’ll all come down to personal preference. If you have used windows for years windows will definitely work better for you hence why almost all new miner’s guides recommend using windows. Most people have already put the time into learning windows and are very comfortable with it. That being said if you are into learning a new operating system. Hiveos on Linex works just great, and linex will use less resources and consume very slightly less power. I’m sure the stability issues I have on my rig on version 210721+ I could sort out, but why bother when there’s not much difference between 210715 and current. The issues I have are most likely caused by my settings as I have my cards all to the max, along with 4 3090’s, 2 6800s, and 2 1660’s all running off only two 80 plus gold 1000 watt psu’s.
you are dual mining with ZIL , is it profitable because i read some post it wasnt do to wasting time switching and and mining zil , while for the same time if you mine ETH is more profitable.
I’m mining beginer, 30 years working with servers and hardware, first time miner. For me HiveOS is great. I lost few days reading forums,.testing overclocking settings, changing speeds and voltages, and now for 30+days I have stabile rig. First few days were like yours. Many restarts, USB memory sticks with corrupted files etc. Now I’m using NVME drive and sweet spot overclocked cards and everything is OK. I restart my rig only after update. You must loose some time reading forums and testing your cards.
Sorry for bad english 
2 Likes
I’ve only been mining with Ezil for a week or so - earned $8 so far. I don’t have any accurate or scientific numbers yet, sorry!
I’m happy with Ezil so far. As a pool, they paid me a few times and it’s been reliable all around.
1 Like