My system was working fine for a couple weeks then the SSD died. The SSD is something like 10 years old… It was only a matter of time.
Once it went out, I grabbed a super cheap SSD and the rig wouldn’t even boot. So, I grabbed a 1T NVME drive as this is all I had laying around (i’ll need to buty another SSD but in the mean time, I’d like to get my rig in operation)
My issue is with my original SSD I was able to get 32 Mh/s on 6 6600xt consuming 45-ish watts of power. Now, I can’t get above what the screen shots are showing below. I have highlighted a few things that show you that I have adjusted the overclock setting manually; however, the memory settings refuse to change…
does any one have any advice?
oh, and I can only get 4 GPU to boot with OS not the original 6. When I plug in the 5th one the system refused to finish POST. I have enabled 4g Mining in bios; however, that made things worse. The rig won’t boot with even just one GPU with 4g and BAR size enabled.
I have even edited the miner config file… No Dice Tango.
I am lost.
Any ideas?