Here are mine, try if you want
gsmonobob your are right. the 930 -1004 was not working at all for my gigabyte 1660 supers. I started working with 1050 and 1850 and jumped up to over 30mh/s. So anyone not having success with -1004 should start at 1800 and work your way up to 2300 keeping an eye on overall wattage use and temperature. Try to find the best balance between mh/s over 30 while keeping the wattage low enough to not overwork your fans to keep the temp under 60c. I hope this helps. Thanks to those who helped me find these settings. Big ups! Peace!
Hola Tengo un equipo con 6 placas 1660 super y cuando ejecuto el comando nvtool --clocks me da que el memory clock esta en 6000 en el oc lo tengo a -1004. Como seteo el core clock? Gracias
Hello, the last MSI 1660 super hynix memory gpus i added can only get 28.4h/s with 930 -1004 80 oc settings. Any recommendations on how to fix it?
try 1060 core and 2200 mem 
1 Like
Hello buddy, thanks for responding. Did you notice its hynix momories? Almost everyone with hynix memory using minus memory.
with newer bios coming out… the negative times for the oc tend to disapear 
1 Like
You mean that my gpu has another version of bios that doesnt need negative memory? Or that after flash you dont need negative memory because i havent flashed them. I misunderstood your answer.
according to the picture u got a newer release therefore u dont need to try negative values!!
1 Like
Thanks a lot 
!
I just realized that it didn’t needed minus memory. I was so sure that i needed minus memory that i hadnt even tried plus 
.
Did you notice that from the (90.16.5A…) characters below the gpu tittle?
PS: Do you know if this bios can be flashed? I tried to flash one of them but it didnt worked. Is it because of this newer bios?
Is it stable with 3500 mem clock ? I use 3300 mem clock but nbminer , lolminer are crash in 24 hours 
MSI GTX 1660 SUPER VENTUS XS OC
0.6-214@220331
T-Rex
PL" 0"
try it
If FAN ERR occurs, lower the MEM step by step by -100.
PS: I have a VENTUS XS OC manufactured in January 2022, but the BIOS flash did not work.
1 Like
Hello, i tried it all of them running successful but one of them dont showing fans and watts after a few minutes of mining. (While fans working completely)
It is stable up to 3600MHz. I use t-rex.
my 1660s’s hashrate and wats messing with drivers over 460.91.03. any suggestion? i wanted to update because my 3070lhr needs newer update with the newer trex version
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.